일 | 월 | 화 | 수 | 목 | 금 | 토 |
---|---|---|---|---|---|---|
1 | 2 | 3 | 4 | |||
5 | 6 | 7 | 8 | 9 | 10 | 11 |
12 | 13 | 14 | 15 | 16 | 17 | 18 |
19 | 20 | 21 | 22 | 23 | 24 | 25 |
26 | 27 | 28 | 29 | 30 | 31 |
- what is CMOS sensor
- FR3
- FMEA
- Copper clad laminate
- CCD sensor
- FR1
- PCB 제조 순서
- PCB 동도금
- 애플 반도체의 역사
- 히오키 검전기
- Plating
- CEM1
- pcb
- 공압 실린더
- ccd 센서란?
- CMOS Image Sensor (CIS)
- 라이프니츠 계산기
- 히오키3480
- CMOS sensor principle
- Cis
- Image senser
- FR2
- What is ccd sensor
- copper
- What is CCD Image sensor
- FR4
- fpcb
- 알리 검전기
- 에어 액츄에이터
- CEM2
- Today
- Total
electronics world
PCB dictionary] Aspect ratio 본문
The aspect ratio is expressed as two numbers separated by a colon (x:y). The values x and y do not represent actual widths and heights but, rather, the relationship between width and height. As an example, 8:5, 16:10 and 1.6:1 are three ways of representing the same aspect ratio.
→ The aspect ratio of the PCB is the hole size for the depth of the drill.
PTH(Plated Through Hole) is calculated as X: Y and mainly uses 00: 1
In case of LVH (Laser Via Hole), X / Y x 100 = 00% is calculated as % for operator's convenience.
The aspect ratio is an important design value that determines the plating throwing power and it should be designed to the production capacity of the product in relation to the copper and sulfuric acid concentration of the electric equipment.
This page was modified April 03 2017
'Plating Basic' 카테고리의 다른 글
전기 동도금 설비 Electric Copper plating machine (0) | 2017.05.24 |
---|---|
PCB 용어]Aspect ratio (0) | 2017.03.27 |
Hull Cell TEST (0) | 2017.03.23 |