| 일 | 월 | 화 | 수 | 목 | 금 | 토 |
|---|---|---|---|---|---|---|
| 1 | 2 | 3 | 4 | 5 | ||
| 6 | 7 | 8 | 9 | 10 | 11 | 12 |
| 13 | 14 | 15 | 16 | 17 | 18 | 19 |
| 20 | 21 | 22 | 23 | 24 | 25 | 26 |
| 27 | 28 | 29 | 30 |
- what is CMOS sensor
- 에어 액츄에이터
- 히오키 검전기
- CEM1
- 라이프니츠 계산기
- FR1
- ccd 센서란?
- FR4
- pcb
- What is CCD Image sensor
- Image senser
- Cis
- Plating
- FMEA
- CMOS Image Sensor (CIS)
- 알리 검전기
- Copper clad laminate
- PCB 동도금
- PCB 제조 순서
- 히오키3480
- FR2
- FR3
- fpcb
- What is ccd sensor
- CMOS sensor principle
- 공압 실린더
- 애플 반도체의 역사
- copper
- CCD sensor
- CEM2
- Today
- Total
electronics world
PCB dictionary] Aspect ratio 본문
The aspect ratio is expressed as two numbers separated by a colon (x:y). The values x and y do not represent actual widths and heights but, rather, the relationship between width and height. As an example, 8:5, 16:10 and 1.6:1 are three ways of representing the same aspect ratio.
→ The aspect ratio of the PCB is the hole size for the depth of the drill.
PTH(Plated Through Hole) is calculated as X: Y and mainly uses 00: 1
In case of LVH (Laser Via Hole), X / Y x 100 = 00% is calculated as % for operator's convenience.
The aspect ratio is an important design value that determines the plating throwing power and it should be designed to the production capacity of the product in relation to the copper and sulfuric acid concentration of the electric equipment.
This page was modified April 03 2017
'Plating Basic' 카테고리의 다른 글
| 전기 동도금 설비 Electric Copper plating machine (0) | 2017.05.24 |
|---|---|
| PCB 용어]Aspect ratio (0) | 2017.03.27 |
| Hull Cell TEST (0) | 2017.03.23 |
